OVER 25 YEARS EXPERIENCE

We are the ONLY 1-off airlock manufacturer in the world. No matter the industry or application we have YOUR airlock solution. Guaranteed.

MADE IN AMERICA

301 W. 3rd Street, Ste L

Sterling, IL 61081

U.S.A.

CAREERS
  • White LinkedIn Icon
  • White Facebook Icon
  • White Instagram Icon
  • White YouTube Icon

© 2020 by Rotary Airlock LLC | YOUR Airlock Solution. Guaranteed.

CP MASTER CLASS PLUS+

Package for chemical/plastics applications with a life cycle less than 1 year

This package consists of a 304L stainless steel housing coated with tri-alloy; endcaps with 304L stainless steel wearplates plated with hard chrome; and a rotor featuring fixed, canted 304L stainless steel vanes with standard bevels tipped with stellite #6 on a 17-4 stainless steel shaft. This is only available in a closed rotor configuration.

TECHNICAL DATA

Housing

304L SS | 304L SS Liner

Tri-Alloy

End-Caps

304L SS | 304L SS Wearplate

Hard Chrome

Vane Config.

304L SS w/ Stellite #6

Shaft

17-4 SS

Seal System

MAP Seal System

Bevels

Standard Bevel

Speed Switch 

Rotor Config.

Closed,

Fixed & Canted

Yes

*CUSTOMIZATION OF INDIVIDUAL PACKAGES POSSIBLE.    CALL (800) 883-8955 TO TALK TO A REP

DETAILS

Housing

304L Stainless Steel

Tri-Alloy

Base material for moderately corrosive applications and food-grade. Suggested coating for moderate to severely abrasive/corrosive applications with 72+ Rockwell hardness rating.

*EXCLUSIVE TO ROTARY AIRLOCK

Seal System

MAP Seal System

With Rotary Airlock's proprietary Mechanical Aerated Polymer Seal System (MAP Seal) there is absolutely ZERO need to pull an airlock or break down any end-caps. You save time, labor, and lost profits.

*PROPRIETARY TO ROTARY AIRLOCK

Bevels

Standard

A Bevel configuration is recommended for applications where products could have difficulty releasing . The type of configuration is recommended based on your product and/or application.

Vane Configuration

304L Stainless Steel w/ Stellite #6

This Tipping finish is added for strength and wear resistance for severely abrasive applications.

*Although not restricted to abrasive applications, it is the most common.

Rotor Configuration

Closed  |  Fixed & Canted

Closed, Fixed, & Canted configurations are recommended but may be adjusted as the application requires.

Shaft

17-4 Stainless Steel

Shaft Material recommended for moderate to severely corrosive applications and moderate to severe torsion strength.

*EXCLUSIVE TO ROTARY AIRLOCK

End-Caps

304L Stainless Steel

Hard Chrome

Base material for moderately corrosive applications and food-grade. Suggested coating for mild to moderately abrasive/corrosive applications with 62-69 Rockwell rating.

High Temperature

Available

High temperature rated bearings, seals, and more available for applications that operate above 250 degrees.

Speed Switch

Yes

The tail end will be drilled and tapped making your airlock installation ready for a speed switch monitor.

 

*Speed switch device available for purchase